ELTEK APP

To ensure that the device is controlling the normal water consumption per load, the ELTEK APP control panel monitors two parameters:

1. flow per minute, from a minimum of 0.5 liters/minute to a maximum of 20 liters/minute for each load;
2. total volume consumed by the device.

The E-WATERBLOCK blocks the flow when excessive water is drawn in a machine load compared to a normal machine load (in terms of volume, total liters). For example, if a washing machine normally draws 10 to 14 liters of water on each fill, once 14 liters are exceeded, an anomaly is signaled and E-WATERBLOCK prevents and blocks the over-fill.

When the device draws fewer liters per minute than the permitted limit, it means that there is a leak.

At this point, E-WATERBLOCK immediately signals the anomaly, allowing for quick troubleshooting.

The ELTEK APP allows the ability to modify preset profiles – all of which can be custom-configured.

If multiple devices are listed, you can also rename each device so that it can be identified immediately.